SmallHD 1303 13" HDR Production Monitor

The SmallHD 1303 13" HDR Production Monitor features an IPS LCD panel with HDR Preview, 1500nits brightness, and 1920x1080 (Full HD) resolution. It offers both SDI and HDMI input/output, and cross conversion of HDMI>SDI or SDI>HDMI.

Clarity for Focus Pulls

The display size, resolution, and pixel density of the 1303 production monitor make it an invaluable tool for precision focus pulling. When you don't have the time or proper measurements, a razor-sharp, low latency display will help you hit your marks.

Ideal for Collaboration

Preview what you're sending downstream using the Output Preview Page, while utilizing software features like customizable focus assist and peaking on your 1303 monitor. If it's the only monitor nearby, the 1303's color accuracy (100% REC 709) and broad viewing angle make it easy to share with clients and directors.

Sunlight Viewable

With a panel roughly 3x brighter than most production monitors, the 1303 is not so hindered by ambient light. Its optically bonded LCD panel combats glare and sunlight, allowing you to pull focus in less than ideal shooting environments.

Power Options

A 2-pin LEMO power output permits seamless integration with accessories like the Teradek Bolt wireless receiver (sold separately).

Add On-Board Accessories

All SmallHD production monitors are equipped with the Rapid Rail Mounting System, the simplest way to connect, store, and travel with critical monitor accessories.

Smooth Tranisitions on Set or Location

Transition from table to C-Stand safely and securely with the 1303's VESA compatible mounting accessory (not included).

Portability

The 1303 monitor is the perfect blend of functionality and portability. With a razor-sharp display and a rugged build quality, the 1303 will boldly go where no other production monitor has gone before.

Features & Specifications: 

• 13" 1920x1080 display
• 10 bit color engine
• 1500 nits brightness
• (2) HDMI In/Out
• (2) SDI In/Out
• HDR Preview
• Full Aluminum Construction
• 1/4"-20 and 3/8"-16 mounting points
• RapidRail shoe mount system

Display:

• Panel Type: IPS
• Resolution: 1920 x 1080
• Pixel Density (PPI): 170 PPI
• Aspect Ratio: 16:9
• Active Area: 11.59" (W) x x 6.52" (H)
• Brightness: 1500 nits
• Contrast: 1140:1
• Color Gamut: 100% Rec.709
• Color Depth: 10 bit
• Viewing Angle: 178°
• Backlight Type: LED
• Adjustable Backlight:  Yes
• Temperature Adaptive Color:  No 

Input Signal Types/Formats:

• 3G-SDI YCC 4:2:2 @ 8 bits:
  • 1080p 60fps
  • 1080p 59.94fps
  • 1080p 50fps
  • 1080i 120fps
  • 1080i 119.88fps
  • 1080i 100fps
• HD-SDI YCC 4:2:2 @ 10 bits:
  • 1080p 30fps
  • 1080p 29.97fps
  • 1080p 25fps
  • 1080p 24fps
  • 1080p 23.98fps
  • 1080psF 30fps
  • 1080psF 29.97fps
  • 1080psF 25fps
  • 1080psF 24fps
  • 1080psF 23.98fps
  • 1080i 60fps
  • 1080i 59.94fps
  • 1080i 50fps
  • 720p 60fps
  • 720p 59.94fps
  • 720p 50fps
  • 720p 30fps
  • 720p 29.97fps
  • 720p 25fps
  • 720p 24fps
  • 720p 23.98fps
• SD-SDI:
  • 480i29.97
  • 576i25
• HDMI Supports YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4:
  • 1080p 60fps
  • 1080p 59.94fps
  • 1080p 50fps
  • 1080p 30fps
  • 1080p 29.97fps
  • 1080p 25fps
  • 1080p 24fps
  • 1080p 23.98fps
  • 1080i 120fps
  • 1080i 119.88fps
  • 1080i 100fps
  • 1080i 60fps
  • 1080i 59.94fps
  • 1080i 50fps
  • 720p 120fps
  • 720p 119.88fps
  • 720p 100fps
  • 720p 60fps
  • 720p 59.94fps
  • 720p 50fps
  • 720p 30fps
  • 720p 29.97fps
  • 720p 25fps
  • 720p 24fps
  • 720p 23.98fps
  • 480p 120fps
  • 480p 119.88fps
  • 480p 100fps
  • 480p 60fps
  • 480p 59.94fps
  • 576p 100fps
  • 576p 50fps
• Component:  Not Supported
• Composite:  Not Supported
• Audio:  HDMI & SDI monitoring through speakers in front bezel or through headphone jack; metering up to 8 channels 

Output Signal Types/Formats:

• 3G-SDI YCC 4:2:2:
  • 1080p 60fps
  • 1080p 59.94fps
  • 1080p 50fps
  • 1080i 120fps
  • 1080i 119.88fps
• HD-SDI YCC 4:2:2 @ 8 bits:
  • 1080p 30fps
  • 1080p 29.97fps
  • 1080p 25fps
  • 1080p 24fps
  • 1080p 23.98fps
  • 1080psf 30fps
  • 1080psf 29.97fps
  • 1080psf 25fps
  • 1080psf 24fps
  • 1080psf 23.98fps
  • 1080i 60fps
  • 1080i 59.94fps
  • 1080i 50fps
  • 720p 60fps
  • 720p 59.94fps
  • 720p 50fps
  • 720p 30fps
  • 720p 29.97fps
  • 720p 25fps
  • 720p 24fps
  • 720p 23.98fps 
• SD-SDI:  Not Supported
• HDMI Supports YCC 4:2:2 @ 8 bits, RGB & YCC 4:4:4 @ 8 bits:
  • 1080p 60fps
  • 1080p 59.94fps
  • 1080p 50fps
  • 1080p 30fps
  • 1080p 29.97fps
  • 1080p 25fps
  • 1080p 24fps
  • 1080p 23.98fps
  • 1080i 120fps
  • 1080i 119.88fps
  • 1080i 100fps
  • 1080i 60fps
  • 1080i 59.94fps
  • 1080i 50fps
  • 720p 120fps
  • 720p 119.88fps
  • 720p 100fps
  • 720p 60fps
  • 720p 59.94fps
  • 720p 50fps
  • 720p 30fps
  • 720p 29.97fps
  • 720p 25fps
  • 720p 24fps
  • 720p 23.98fps
  • 480p 120fps
  • 480p 119.88fps
  • 480p 100fps
  • 480p 60fps
  • 480p 59.94fps
  • 576p 100fps
  • 576p 50fps
  •  480i 120fps
  • 480i 119.88fps
  • 480i 60fps
  • 480i 59.94fps
  • 576i 100fps
  • 576i 50fps
• Component:  Not Supported
• Composite:  Not Supported
• Audio: Sent downstream unless a LUT is loaded on the output page, which disables Audio Out

Connector Types:

• SDI: (2) 3G Inputs, (2) 3G Outputs
• HDMI: (1) Input, (1) Output
• Component: Not Supported
• Composite: Not Supported
• Audio: (1) Headphone Jack on Front of Monitor
• Power In: (1) AC Power Input (C13, 90-260V), (1) XLR 4-pin 12-34V DC         
• Power Out: (1) Lemo Output 12V DC @ 4A Max
• USB: (1) Front USB 2.0, (2) Rear USB 2.0

Controls:

• Primary Control Interface: Joystick Navigation, Dedicated Back Button
• Additional Dedicated buttons for: Image Capture, LUT Selection, Backlight Level, Input Selection, Scopes Toggle
• Record/Capture: Dedicated Capture Button on Front Bezel     

Data I/O:

• Storage: SD Card for LUTs, Captured Images, Image Overlays, Profile Saving & Loading, Firmware Upgrades
• USB: (1) Front & (2) Rear USB Ports for power (1.5A shared total), LUT Loading, Profile Saving & Loading

Power:

• Connector Type: (1) XLR 4-pin 12-34V DC IN for Batteries, (1) 12V Lemo 2-pin OUT (4A Max)
• Voltage: 12-34V DC
• Power Consumption: 25-39W
• Recommended PSU: AC-DC Power Converter "Brick" Included with Monitor, 110-240V AC, 50-60Hz Input; 15V / 6A Output
• Battery Types: Gold Mount, V-Mount via 4-pin XLR Connector
• Output Voltage: 12V / 2A max. via LEMO connector

Environmental:

• Compliance: FCC, IC, CE, RoHS
• Operating Temperature: 32°F to 100°F (0°C to 37.7°C)
• Storage Temperature: 4°F to 120°F (-15.5°C to 48.8°C)
• Screen Protection: Acrylic or Anti-Reflective Acrylic screen protetor available as an option (sold separately)
• Height: 9" (22.86cm)
• Width: 13" (33.02cm)
• Depth/Length: 2.88" (7.32cm)
• Weight (Item Only, without battery): 8 lb (3.63kg)
• Weight (Packaged) : 12 lb (5.44kg)
• Mount Points: (2) 1/4"-20 on Top, Left & Right sides; RapidRail - Cold Shoe style rails on rear of monitor

Software:

• Pixel Zoom (type):  2x & 4x Zoom with smooth pan via joystick
• Frame Guides:  Yes, Preset & Customizable Aspect Ratios
• DSLR Scale:  Canon 5D Mk II & Canon 7D
• Custom Scale:  Yes (Underscan & Overscan)
• Anamorphic De-Squeeze:  Yes (1.33x, 1.5x, 1.66x, 2.0x)
• Image Rotate(Manual/Automatic):  Yes, Automatic or Manual
• Image Flip (Manual/Automatic):  Yes, Automatic or Manual
• Cross Conversion: Yes (HDMI > SDI & SDI > HDMI)
• Focus Assist (Colors):  Yes, User Adjustable Color and Intensity
• Peaking:  Yes, User Adjustable Intensity
• False Color:  Yes, Rainbow & ARRI Style
• Zebra:  Yes, Dual (User Configurable)
• Waveform:  Yes (Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting)
• Vectorscope:  Yes (with Optional Skintone line)
• RGB Parade:  Yes, Fully User Customizable
• Histogram:  Yes, Luma & RGB Style  
• Image Capture:  Yes, With Dedicated Button   
• Custom LUTS:  Yes, Loadable by Page or as Systemwide Color Calibration 
• LUT Downstream:  Yes, Available on SDI 1 or HDMI Out
• LUT Import: Yes, via SD Card or USB storage device
• Image Overlay:  Yes, with Intensity Slider and Blink Setting    
• Firmware: User Upgradable; compatible with 1303-1703-2403-3203 Firmware Version 1.1 and later
• Audio Meters:  Yes, HDMI & SDI up to 8 channel