Cameo VESA Mount System

This system includes the following items:

• Cameo VESA Mount
• Cameo VESA Monitor Handle
• Cameo VESA Monitor Battery Mount - Anton Bauer Gold Mount
• Cameo VESA Monitor Accessory Plate
• Cameo V-Lock Kit

The Cameo VESA Mount fits onto a standard 5/8" stud or junior stand and is the most advanced mount on the market in terms of monitor positioning and safety. The unit offers 360° of rotation which allows for easy monitor leveling or on-the-fly vertical to horizontal repositioning, as well as 230° of tilt adjustment. Internal friction pads prevent monitor slippage when adjusting either axis.

Simply twist the large knob to tighten the VESA Mount into position on your stud or stand. Use the convenient lever on the side of the VESA Mount to lock or unlock the ability to adjust monitor tilt. Notice how the easy-to-use knob is large enough to be tightened or loosened while wearing gloves in cold weather. 

Features:

• Rated to support a monitor up to 50 lb
• Internal friction system for maximum tilt and rotation control
• Compatible with 75 mm and 100 mm VESA spacing standards
• Add-ons for additional mounting and carrying options

Be sure to view Ian's blog on the VESA Mount for a visual demonstration of the VESA Mount in use. It also features the Cameo Battery Mount positioning so you can power your monitor with a battery.

Also available from Cameo:

Battery Mounts:
CAM-VESA-120 Cameo VESA Monitor Battery Mount - AB Gold Mount
CAM-VESA-130 Cameo VESA Monitor Battery Mount - V-Mount

Monitor Handle:
CAM-VESA-110 Cameo VESA Monitor Handle

Accessory Plate:
CAM-VESA-140 Cameo VESA Monitor Accessory Plate

The Cameo VESA Monitor Handle is a sturdy, folding T-handle that attaches to the optional Cameo VESA Mount (VESA-100) with (2) Phillip's head screws. It attaches to the VESA Mount using the two holes provided on either side of the tilt adjustment. Please view our graphics for close-up detail of the holes and the handle configured on a monitor.

You can use the Cameo VESA Monitor Handle to reposition your monitor when you tilt the monitor up/down on the VESA Mount. You can also use this as a secure lift point when holding the edge of a monitor with one hand and this monitor handle with another. As always, be extra careful when moving monitors to ensure you have a complete grip and can transfer the monitor safely from place to place.

The handle conveniently folds up and down to provide you with smaller profile for storage purposes.

Maximum payload: 50 lb

NOTE: You do not need the optional Cameo VESA Monitor Accessory Plate to attach this handle. It fits directly on the VESA Mount.

The Cameo VESA Monitor Battery Mount is an Anton Bauer gold mount battery mount. The mount includes a 12" cable with a right-angle XLR 4-pin connector. 

Pair the battery mount with a 2-axis Cameo VESA Mount (CAM-VESA-100) to power your monitor and adjust positioning (230° tilt and 360° rotation). The same long screws provided with the optional Cameo VESA Mount will attach through both the battery and the monitor mount to secure both products together. The convenient, short cable on the battery mount stays close to the monitor to prevent catching during rotation.

View Ian McCausland's Cameo VESA Mount Blog to check out the battery mount and VESA monitor mount in action.   

NOTE: Cameo VESA Mount, monitor, and batteries are sold separately.

The Cameo VESA Monitor Accessory Plate includes a 15mm rod holder, several mounting holes, and attaches to an optional Cameo VESA Mount (VESA-100). It is designed to add accessories to your monitor and share power input or image output with the monitor so you can connect an optional wireless receiver, among other devices.

This Monitor Accessory Plate offers two convenient 1/4-20 mount points on the edge and the rear of the accessory mount. The large number of them is to facilitate positioning of cables and also offer multiple mounting options.

A 15mm mount port is included with a kip lever to tighten your 15mm rod and secure it into place.

Pair this VESA Monitor Accessory Plate with an optional Cameo Chico Clamp and a 15mm rod so you can position your accessory away form the monitor.

To attach this Monitor Accessory Plate to your Cameo VESA Mount and your monitor, simply remove (2) screws in the VESA Mount where you want to position your Accessory Plate (being careful to support your monitor with help from another person or to remove/replace only one screw at a time). Add the plate and secure the screws again. The screws provided are long enough to go through both the VESA Mount and the Accessory Plate. If you already have an optional battery mount attached to your VESA Mount, then you can place this Accessory Mount on the opposite side to maintain a good balance and allow for easy access to both accessories.

The Cameo V-Lock Kit provides quick and secure mounting of your camera accessories. It utilizes the industry-wide V-Lock mounting system. Comprised of male and female V-Lock components, our V-Lock Kit is constructed of precision-machined aluminum and stainless steel. The Cameo V-Lock features two methods of safety locking.

Both units allow for attachment to accessories from either the front or the back, without the need for disassembly.

Features:

• Multiple mounting positions
• Safety latch prevents accidental release
• Lever release by your choice of push or pull motion
• Compatible with third-party V-Lock components
• Captive 1/4"-20 screws included

Also available:

CAM-VLOK-110 Cameo 2x4 V-Plate for Mounting Wireless Receivers
CAM-VLOK-120 Cameo 4x5 V-Plate for Mounting Wireless Receivers
CAM-VLOK-130 Cameo Arri Ring for V-Lock
CAM-CHIC-100 Cameo Chico Clamp for 15mm & 19mm Rods