Cameo VESA Monitor Accessory Plate

The Cameo VESA Monitor Accessory Plate includes a 15mm rod holder, several mounting holes, and attaches to an optional Cameo VESA Mount (VESA-100). It is designed to add accessories to your monitor and share power input or image output with the monitor so you can connect an optional wireless receiver, among other devices.

This Monitor Accessory Plate offers two convenient 1/4-20 mount points on the edge and the rear of the accessory mount. The large number of them is to facilitate positioning of cables and also offer multiple mounting options.

A 15mm mount port is included with a kip lever to tighten your 15mm rod and secure it into place.

Pair this VESA Monitor Accessory Plate with an optional Cameo Chico Clamp and a 15mm rod so you can position your accessory away form the monitor.

To attach this Monitor Accessory Plate to your Cameo VESA Mount and your monitor, simply remove (2) screws in the VESA Mount where you want to position your Accessory Plate (being careful to support your monitor with help from another person or to remove/replace only one screw at a time). Add the plate and secure the screws again. The screws provided are long enough to go through both the VESA Mount and the Accessory Plate. If you already have an optional battery mount attached to your VESA Mount, then you can place this Accessory Mount on the opposite side to maintain a good balance and allow for easy access to both accessories.