Overview
Overview
The Decimator DMON-6S 6-Channel Multiviewer with SDI & HDMI Outputs is a truly portable converter, incorporating Decimator's easy-to-use LCD and button control system. This provides easy access to most features without using complicated LED/button control, DIP switches, or needing to carry around a computer to change a simple setting.
Features:
- Supports both 3G level A and B on the input and output
- Allows conversion between 3G level A and B
- Low cost miniature (3G/HD/SD)-SDI 1 to 6 channel Multi-Viewer or 6 to 1 input multiplexer
- 6 x (3G/HD/SD)-SDI active loop copies of each input
- Custom Layouts with various standard layouts
- (16) Character UMD overlay per window with individual enables, custom positioning, and size
- (16) Channel Audio Metering overlay per window with individual enables, custom positioning, and size
- Safe Action and Safe Title overlay per window with individual enables and adjustment
- Center Cross overlay per window with individual enable
- Audio ID overlay
- Tallies can be applied to either Tally Boxes (Default), Outside Safe Action Area, or Border
- Tally boxes allows for up to (4) Tallies per window (Green, Red, Blue and Yellow)
- Load and restore Custom Layouts
- Fast switching between inputs using Full-Screen scaling
- Selectable output format in both Full-Screen and Multi-Viewer mode
- Low latency buffering for each input allowing non-synchronous inputs
- Linked (3G/HD/SD)-SDI and HDMI outputs
- 6 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
- Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
- Variable aspect ratios per window
- Pass-Through mode allowing any of the (6) inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs
- 32 GPI on 37-pin D-SUB connector for Tallies and Remote Switching
- RS422/485 on 37-pin D-SUB connector for Dynamic UMD and Tallies via TSL protocol
- USB port for control and firmware updates
- Heavy duty metal box
- Metal thread, locking DC Power Socket
What's in the Box
- USB Cable
- HDMI Cable
- Power Supply
- Decimator DMON-6S 6-Channel Multiviewer with SDI & HDMI Outputs
Specifications
Specifications
Key Highlights
- 1 to 6 Multi-Viewer
- 6 to 1 input multiplexer
- (16) Character UMD overlay
- (16) Channel Audio Metering overlay
- 6 x (3G/HD/SD)-SDI inputs
- HDMI & 3G/HD/SD-SDI outputs
- Auto detection
Connectors
Output Connector/Port:
6 x BNC - 3G/HD/SD-SDI with Active Loop-through
1 x HDMI - Type A
Input Connector/Port:
USB - for control and updates
6 x BNC - SD/HD/3G-SDI
Media Conversion
Video Output:
HDMI Output Formats - 1080p@60/59.94/50/30/29.97/25/24/23.98Hz, 1080i@60/59.94/50Hz, 1080p@30/29.97/25/24/23.98Hz, 720p@60/59.94/50/30/29.97/25Hz, 625i50, 525i59.94
Supported Resolutions:
3G:SMPTE 424M@2.97 and 2.967Gb/s - 1080p@60/59.94/50Hz
HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s - 1080i@60/59.94/50Hz, 1080p/psf@30/29.97/25/24/23.98Hz, 720p@60/59.94/50/30/29.97/25/24/23.98Hz
SD:SMPTE 259M@270Mb/s - 625i50, 525i59.94
Power
Input Voltage:
5-32V DC - NOTE: Positive center pin