Overview
The HoneyBadger doesn’t care how big your campus is. It can handle the job with a feature set that is unavailable elsewhere in the broadcast production signal extension market. With support for 8 cameras and return feeds plus Genlock extension the system has your image acquisition requirements under control and in time. The Partyline Intercom channels and eight micpre inputs have your talent on-air loud and clear while the two isolated 1GbE LAN extensions let you get your IP connectivity extended over the same two Single-Mode fibers.
HoneyBadger Remote unit is a 5RU rack mountable chassis with dual, redundant 48VDC power supplies and a battery plate for short term emergency back up power. Fiber connector options include dual ST, Neutrik opticalCON DUO and LEMO 304M SMPTE standard connectors. The HoneyBadger Local side unit is a compact 4RU that provides the same industry standard connectivity as the remote side with full size BNCs for video, XLRs for Audio and easy to terminate Phoenix connectors for the Serial Data and GPIOs. The HoneyBadger is also available with 12G-SDI I/O to support 4K production.
Specifications:
Digital Video
|
8x Transmit |
12G/3G/HD/SD-SDI SMPTE ST-2082, ST-2081 , SMPTE 424M, 292M, 344M, 259M |
|
8x Receive |
12G/3G/HD/SD-SDI SMPTE ST-2082, ST-2081 , SMPTE 424M, 292M, 344M, 259M |
|
Input Coax EQ |
50m at 11.88Gb/s, 90m at 5.94Gb/s, 180m at 2.97Gb/s, 240m at 1.485Gb/s, 400m at 270Mb/s |
|
Input Level |
800mV (peak to peak) |
|
Impedance |
75 Ohms |
|
Bit Error Rate |
10-12 |
|
Jitter |
< 0.03UI under 1 MHz |
|
Rise/Fall Times |
< 270ps |
|
Return Loss |
>15 dB at 5 MHz - 1.485 GHz, >10 dB up to 3 GHz, >7dB 3 to 6 GHz, >4dB 6 to 12GHz |
|
Connector |
(Full Size BNC) |
Analog Audio
|
8x In (3-pin XLR Female) |
Line Level or Mic-Pre with switchable Phantom Power |
|
8x Out (3-pin XLR Male) |
Line Level |
|
S/N |
>90db |
|
Frequency Response |
< +/-0.1db (20Hz - 20kHz) |
|
Distortion |
< 0.05% |
|
Max I/O Level |
+24dBu |
|
Impedance In (bal) |
> 10k Ohms + |
|
Impedance Out (bal) |
< 50 Ohms |
|
Connector |
(3-pin XLR) |
Serial Data
|
2x |
RS-232, RS-422, RS-485 (Requires Cable Modification) |
|
232 In V |
+/- 25V max, 2V min |
|
232 Out |
V +/- 5V @ 3Kohm, 1.6V Sens |
|
422,485 In |
V -7V to 12V, 0.2V diff min |
|
Connector |
Phoenix Connector |
Ethernet
| 2x | 10/100/1000 Mbps |
| Connector | RJ45 |
Tally/GPIO
|
1x |
GPI & GPO Normally Open, Form 1 SPST |
|
1x |
Tally In & Tally Out Normally Open, Form 1 SPST |
|
Connector |
Phoenix Connector |
Electro-Optical
|
Optical Wavelengths |
DFB Laser 1271nm-1610nm |
|
TX Laser Output Power |
-2 - 0dBm, Class 1 |
|
Receiver Sensitivity |
-24dBm(1.25G), -20dBm(3G), -14dBm(12G) |
|
Fiber Compatibility |
Single-mode |
|
Distance Limit |
3G up to 20km & 12G up to 10km |
|
Connector |
ST, SC, LC, Lemo 304M, Neutrik opticalCON Duo |
* The number, quality, and cleanliness of all fiber cables and interconnection points in the fiber path will affect the maximum usable cable length.
Intercom
|
4x |
2-Wire Wet or Dry |
|
Type |
2-channel party-line, unbalanced (pin 1 common; pin 2 DC with channel 1 audio; pin 3 channel 2 audio) |
|
Compatibility |
single- and dual-channel intercom systems such as from RTS® and Clear-Com® |
|
Impedance–Normal |
>20k ohms |
|
Impedance–2-Wire (PL) Power Source Mode |
200 ohms |
|
Nominal Level |
–10 dBu RTS, -14dbu Clear Com |
|
“Mic Kill” Signal |
24 kHz, ±1% |
|
2-Wire Power Source |
28 Vdc nominal, 750 mA maximum |
|
Connector |
2-Wire = 3-pin XLR Male |
Power
| Power Input | 85-264VAC, 47-63Hz |
| Power Consumption | 200W Max, 100W Typ. |
| Connector Type | IEC320-C14 |
Specifications
Key Highlights
- Extend All Signals over 2x Single Fiber
- Supports 8x Camera Feeds and SDI Returns
- 8x Wet/Dry Partyline Intercom Channels
- 2x Independent 1GbE LAN Extensions
- Redundant 48VDC Power Supply
- Optional Battery Plate Backup
- 12G-SDI Options
