Overview
Overview
The Shure MX202B/C Microflex Overhead Cardioid Mini-Condenser Microphone is a small, unobtrusive microphone that can produce great sound. This mic captures high-quality sound in a compact, adjustable package. Each model features an in-line preamp and choice of interchangeable cardioid (included) or supercardioid (sold separately) condenser microphone cartridge attached to a flexible 4" gooseneck with a 30' cable. Black, unobtrusive finish.
Features:
-
Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
-
Interchangeable cartridges provide an optimal polar pattern choice for each application
-
Balanced, transformerless output for increased immunity to noise over long cable runs
-
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
-
Black finish blends unobtrusively with most surroundings
-
Preamp options available offer easy installation in ceilings or microphone stands
-
When combined with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound reproduction with minimum RF interference or electromagnetic hum
What's in the Box
- 30' Mic Cable
- Stand Mount Hardware Kit
- In-Line Preamp
- Shure MX202B/C Microflex Overhead Cardioid Mini-Condenser Microphone
Specifications
Specifications
Key Highlights
- Hanging Condenser Microphone
- Compact, unobtrusive
- In-line preamp
- Stand adapter
- 30' cable
- Color: Black
- Interchangeable Cardioid cartridge
Cable
Cable Length:
30' - 9m
Cable Type:
Audio
Microphones
Dynamic Range:
96 dB - 1 kΩ load at 1 kHz
Impedance:
180 ohms actual (EIA rated at 150 ohms)
Microphone Type:
Condenser
Signal-to-Noise Ratio:
66 dB - referenced at 94 dB SPL at 1 kHz
Frequency Response:
50 to 17,000 Hz
Microphone Notes:
Common Mode Rejection - 45 dB minimum (10 Hz to 100 kHz)
Output Configuration - Active balanced
Phantom Power Required - 11-52V DC Phantom, 2.0 mA
Polarity - Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of out- put XLR connector
Polar Pattern - Cardioid
Preamplifier Output Clipping Level (1% THD) - –6 dBV (0.5 V)
Sensitivity:
–35 dBV/Pa (18 mV) - at 1 kHz , open circuit voltage
Equivalent Noise Level:
28 dB SPL - A-weighted
Max SPL:
124 dB - 1 kHz at 1% THD, 1 kΩ load
