Overview
The HEDEN YMER 1-Motor Lens Control Kit with M21VE-L with LenSaver Calibration is a wireless focus or iris control system with an optional wired zoom control through LANC.
LenSaver Calibration is a unique new way of calibrating a follow focus system, just press the calibration button and move the lens by hand from end-stop to end-stop then press the button again, that’s it. LenSaver Calibration is easy, safe and fast.
Manual Override makes it possible to take manual control of the lens without jeopardizing calibration.
Wireless transmission up to 500 meters (1640 feet) line of sight. Small with incredibly intuitive controls and unique features.
Smooth rotary movements of the control knob with adjustable resistance give you a haptic connection with total control of the lenses movements. Adjustable limit points for easy focus from A to B and precision mode for super fine control over an adjustable range.
One press on the camera run button starts and stops recording from a distance.
Mounting points on the transmitter makes it easy to attach other devices.
Specifications (YMER-1 Transmitter):
|
Length (ex antenna) |
152mm / 6” (incl. antenna): 185mm / 7.3” |
|
Height (ex control knob) |
37mm / 1.45” (incl. control knob): 80mm / 3.15” |
|
Width |
76mm / 3” |
|
Wireless transmission |
Up to 500 meters (1640 feet) line of sight |
|
Power source |
Sony NP-FM500H compatible battery (not included) |
Specifications (YMER 1+1 Reciever):
|
Drives up to two Hedén motors | |
|
One channel wireless and one channel wired through LANC | |
|
Length (ex antenna) |
100mm / 4” |
|
Height |
26mm / 1” |
|
Width |
54mm / 2” |
|
Weight |
Approx. 180 gr / 6.4 oz |
|
Works with Hedén motors |
M21VE-L, M26VE, VM35, LM30 and CM55 |
|
Range (Indoors) |
Approx. 15 – 100 meters (50-330 feet) depending on building materials, interference and other obstacles (Line of sight): 500 meters (1650 feet) |
|
Power source |
14.4V PTAP |
Specifications (Cables):
|
Motor cable | 7 pin Std. male Connectors at both sides |
|
60 cm (23.6”) long | |
|
Power cable | 2 pin male connector to PTAP male at the other side |
|
60 cm (23.6”) long |
What's in the Box
- Hedén neck strap
- Motor cable
- Power cable
- White scale ring
- Bracket with 19mm to 15mm reduction insert
- Gear 0.8 module
- Hedén digital servo motor M21VE-L
- YMER 1+1 receiver
- YMER-1 transmitter
Specifications
Key Highlights
- LenSaver Calibration
- Smooth knob movements
- Adjustable knob resistance
- Fast and accurate responsiveness
- High motor speed
- Manual Override
- Unique 1+1 receiver
- Wired LANC control
- Wireless transmission up to 500 meters
- Replaceable standard Sony battery
