Wooden Camera Canon C300 Mk II PL Modification Kit

This kit includes the following items:

• (1) PL Mount with Port Cap
• (6) M2.5 socket cap screws for PL installation
• (1) Shim Set
• (1) Jeweler's Screwdriver
• (6) M2.6 Phillips screws (in case Canon body screws are lost)

NOTE: Camera sold separately.

The Wooden Camera Canon C300 Mk II PL Modification Kit allows users to convert their Canon C300 Mk II camera to PL Mount through a short modification process. All necessary tools are included in the kit. The PL Mount is made of aircraft grade aluminum and includes the PL port cap. Shims are provided with the kit for adjusting back focus and the appropriate shims are installed prior to shipping. Further adjustment should not be needed but can be checked using a wide angle lens and a focus chart.

NOTE: The modification process can be reversed. If you choose to revert to EF mount in the future, simply reverse the steps in the process. With this kit, the modification is performed by the user. Do not hesitate to contact AbelCine Service if you require assistance.

IMPORTANT NOTE: While the vast majority of lenses are compatible, due to the ND filter turret on the Canon C300 Mk II, lenses with a rear protrusion longer than 33.5mm (measured from the PL flange) are not compatible. This modification is not compatible with the C100, C100 Mk II, C200/200B, C300, C500, or C700.

Shim set (stackable to achieve necessary thickness):

• Silver .0127mm (0.0005") 
• Amber .0254mm (0.001")
• Purple .0381mm (0.0015")
• Red .0508mm (0.002")
• Green .0762mm (0.003")
• Tan .1016mm (0.004")
• Blue .127mm (0.005")