Wooden Camera D-Box for ARRI ALEXA Mini - V-Mount

The Wooden Camera D-Box for ARRI ALEXA Mini - V-Mount is a custom version of the Wooden Camera D-Box that adds power distribution, standardized remote start/stop, and hot swap capabilities for the ARRI ALEXA Mini. An IDX V-Mount plate provides (2) P-Tap ports (unregulated) and is hard wired to the D-Box, which features a 10A fuse.

(2) 16" (40cm) cables run from the power plate to the 8-pin LEMO power connector and the 7-pin EXT port on the ALEXA Mini.

The bottom of the D-Box features (3) 1/4"-20 holes to which the user can attach a Rod Clamp 15mm LWS, Rod Clamp 15mm Studio, or Rod Clamp 19mm Studio (rod clamps sold separately). For an adjustable mounting system, the Battery Slide or Recorder Slide (sold separately) can be paired with the same Rod Clamps listed above.

NOTE: This product will attach to the ARRI BAP-1 (instructions are included).

D-Box Connectors/Ports:

• 7-pin LEMO compatible (EXT Port)
  • Replica of connector on rear of camera
  • Maintains functionality of external communication, R/S, and power
  • Note this slot is NOT swappable
• 2-pin LEMO compatible (12V, Unregulated)
  • ARRI standard wiring
  • This slot can be swapped for Hirose, 4-pin LEMO, or P-Tap (note that only one P-Tap can occupy slot 2 or 3)
• 2-pin LEMO compatible (12V, Unregulated)
  • ARRI standard wiring
  • This slot can be swapped for Hirose, 4-pin LEMO, or P-Tap (note that only one P-Tap can occupy slot 2 or 3)
• 3-pin Fischer (24V, Regulated)
  • Integrated regulator to convert battery voltage to 24V
  • Maximum 3A shared between slot 4/5
  • Note this slot is NOT swappable
• 3-pin Fischer (24V, Regulated)
  • Integrated regulator to convert battery voltage to 24V
  • Maximum 3A shared between slot 4/5
  • Note this slot is NOT swappable
• 4-pin Mini XLR (12V Input)
  • Hot swappable power input with included 8" pigtail cable for standard 4-pin XLR (12V nominal)
  • Capable of providing power to accessories and camera without brick battery attached
  • Note this slot is NOT swappable

NOTE: Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.

Specifications:

• Battery Mount: IDX V-Mount
• Weight: 1.2 lb (534 g)
• Dimensions: 3.5" x 1.7" x 5.7" (90mm x 43mm  x 146mm)