Wooden Camera Cableless V-Mount for RED WEAPON / SCARLET-W / RAVEN

The Wooden Camera Cableless V-Mount for RED WEAPON / SCARLET-W / RAVEN is a cable-free, V-Mount battery plate system designed for use with RED WEAPON, EPIC WEAPON (EPIC-W), SCARLET WEAPON (SCARLET-W), and RAVEN cameras.

This system utilizes an IDX brand battery plate with (2) P-Tap ports and the Wooden Camera pogo interface module. The assembly attaches without tools, directly to the back of the RED camera, Base Expander Module, REDVolt Expander Module, and some third party modules (such as OMODs).

This system can be configured in center, high, and low modes. Center mode is most appropriate for regular use. High mode is where the battery plate sits above the back of the camera. Low mode is where the plate is configured to be flush with the top of the camera body, leaving batteries in a very compact configuration. The RED DSMC2 top handle will clear RED Brick batteries when the Cableless V-Mount plate is configured in Low mode.

The Cableless V-Mount will communicate charge percentage or voltage data to the camera's LCD display. Intelligent batteries like RED Bricks, Blueshape, Switronix, PAG, and other batteries utilizing SMBUS or reversed SMBUS will allow for the module to communicate percentage data and estimated run time. Non-SMBUS batteries like some IDX and other low cost batteries will only provide voltage data to the camera through the Wooden Camera module.

IMPORTANT NOTE: When using Cableless and D-Box battery modules it is important to know the amount of power your batteries are capable of providing. A RED Brick battery can supply up to 10A, with the camera generally consuming 4-6A in standard configuration.

Although the remaining power is available from the P-Tap, LEMO compatible, Fischer connectors, etc., it is best to limit the power draw to 4A or less for best results. Consuming more power than a battery is capable of providing will cause the battery to shut down.

Specifications:

• Battery Mount: IDX V-Mount
• Weight: 1 lb (453.6 g)
• Dimensions: 5.5" x 1.3" x 3.3" (142mm x 33mm x 85mm)

NOTE: Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.