PAGlink PowerHub - Gold Mount

The PAGlink PowerHub is a compact and user-configurable camera accessory power device. It is designed for use with the PAGlink Gold Mount system of intelligent linking batteries.* This breakout box will help you save time on set due to its hot swapping capabilities.

The PAGlink battery system is designed for high-load camera set-ups. The linked batteries provide up to 12A, enabling you to simultaneously power the camera and multiple 12V accessories, such as a camera light, a monitor, audio and transmission devices. The PowerHub provides the multiple outputs required for this purpose.

PowerHub incorporates (5) output ports that accept a range of interchangeable, plug-in connectors. (4) D-Tap connectors are supplied as standard. A USB connector (5V, 1A) is also included, which allows you to charge your smartphone or power similar low-voltage devices. These connectors are interchangeable with Lemo (2-pin), Hirose (4 pin) or 2.1mm (PP90) connectors, available as a separate purchase, and can be used in any of the (5) power ports. Any combination of connectors is possible. This means you can configure the PowerHub to your exact requirements.

The ultra-compact and lightweight PowerHub is designed to be used sandwiched between your (2) PAGlink batteries. This increases the depth of the battery stack by only 12mm. Utilizing (2) batteries will enable the rear battery to be hot-swapped without disconnecting your accessories. When plugged into the built-in D-Tap found on other manufacturer's batteries, you would need to disconnect your accessories. Therefore, the PAGlink PowerHub saves you time. Alternatively, the PowerHub can be connected to rear battery of the stack.

Features:

• Power more 12V camera accessories, using PAGlink Gold Mount batteries
• Sandwich the PowerHub between PAGlink batteries to maintain their hot-swap capability
• Includes (4) D-Tap outputs for 12V camera accessories
• Includes (1) USB connector(5V, 1A) for charging low voltage devices, like your mobile phone
• Other output connector types available for purchase separately, in case you want to swap in other connctors
• Size: 3.5 x 4.48 x 0.98" (89 x 114 x 25mm)
• Weight: 0.27 lb (125 g)

* NOTE: The PowerHub Model 9712 can only be used with PAGlink Gold Mount batteries (Models 9306 and 9313). It draws power from the PAGlink contacts on the face of the battery. It cannot be connected directly to the camera or used with non-linking Gold Mount batteries.