Flowcine Serene

The Serene is a patent pending 2-axis spring arm which attaches at the end of the Easyrig (2/2.5/3 or Vario5) arm. It stabilizes vibrations and motion errors on the vertical axis which result from walking or running with the rig. It also stabilizes side-to-side errors in the same scenarios by counter pivoting around its center axis. At the same time, you have full use of the Easyrig cord extension which allows you to go from high to low mode while at the same time the Serene will take care of the vertical and side-to-side stabilization by adding two more stabilized axes to your existing system.

The Flowcine Serene accepts a camera payload between 13.22 to 42.99 lb (6-19.5 kg). You can easily fine tune the spring tension without tools. Of course, it works well with the Gravity One, but it also works really well for other gimbal rigs like the Freefly MoVI, DJI Ronin, Letus Helix, and most other leading gimbal rigs.

Popularity

The Serene has quickly become a must-have item for any Easyrig user. After its introduction in autumn of 2014, around 10% of all Easyrig users already adapted their Easyrig with a Serene. This number steadily increases as using the Serene together with a gimbal becomes more and popular.

Easy to Adapt

The Serene mounts at the very end of the Easyrig upper support arm. The string is routed upwards and through the Serene instead of the normal way (straight down from the tip of the Easyrig). To make this happen, you must slightly alter your Easyrig arm with one or two holes (depending on the Easyrig model). This is a fairly easy operation which most users can do themselves. We supply a drill template piece for exact placement of the holes. If you feel uncomfortable doing it, you can send in your arm to us for modification or get help from your local distributor.

Further Extend Your Easyrig Range

The Serene can be bought with an extra accessory, the Serene Extension arm (sold separately), which is an additional arm the user can quickly and easily mount on their current Serene to extend the length of the arm. It allows a fully adjustable distance in 10mm increments, in order to find the perfect length of the arm to position the camera rig at the right distance from your body. This accessory also increases the boom range of the Serene arm which results in even better performance. The Serene Extension arm ships with an additional, stronger spring to compensate for the added leverage, and at the same time improve performance. The minimum extension length is 56mm, and the max is 116mm in 10mm increments.

Features:

• Mounts on any Easyrig arm in the 2/2.5/3 and Vario4/5 series (for rigs over 16 kg the Serene manufacturer recommends the Easyrig Standard upper arm and not the Medium +130mm or Long +230mm versions)
• Serene arm allows for a frictionless boom range of 180mm
• Easyrig cord passes through enabling high/low mode shooting
• Two springs cover the payload range of 6-19.5kg
• Totally reactive at both slow and fast walking/running sequences with push/pull forces of 800g to 1200 g depending on the camera load and gimbal total weight
• Allows for further accessories like the Serene Extension arm
• Ships with new Easyrig cord and drilling template which fits all Easyrig 2/2.5/3 and Vario 4/5 support bars

Note: this product requires an Easyrig Support Bar to function