Overview
The centerpiece of the Motion Impossible AGITO SPORTS Bundle is the AGITO, the only fully modular dolly system capable of operating both as a free-roaming cinema platform or on track. Combining the AGITO Sports Bundle with Motion Impossible's Tower (dynamic height control) or V-Con Pro (vertical stabilization) accessories, and a remote head of your choice, enables total freedom of stabilized movement. A Complete Bundle is also available, which includes all of the above systems and more for maximum production versatility.
The modular design of AGITO allows it to be transported and assembled on location by just one certified operator. You can use the AGITO to produce dynamic camera movement or simply get the camera close to the action without putting your crew at risk, at speeds of up to 32 mph (51 kph)* or as slow as 1.5 cm/s, with highly accurate movement, thanks to a cutting edge encoded motor system.
*IMPORTANT NOTE: Top speed in SPORTS configuration requires the upcoming, optional AGITO Volt upgrade (sold separately; release TBD) and use of Monster Wheels (included). Speed is restricted to 15 mph (24 kph) until training prerequisites are met. Please contact an AbelCine salesperson for details.
Ideal for use inside or outside the studio, AGITO Sports offers a new approach to camera movement, with complete flexibility using Motion Impossible's growing arsenal of modules and accessories, and intuitive operation not available with other systems. With the rush to keep live productions running with limited crew during the global pandemic, AGITO can easily be configured to maintain social distancing in the studio or on location.
AGITO Core
The core is the heart of the AGITO, containing all electronics and power management for the entire system.
AGITO Sports
When fitted with Sports ends, your AGITO becomes the world's first multi-terrain robotic dolly system. With controllable speeds from 1.5 cm/s to 26 mph (32 mph with future AGITO Volt upgrade) and independent steering on each end, the AGITO is the ideal tool for fluid camera movement in the studio or on location.
AGITO Tower
The AGITO Tower is a telescopic column allowing you to raise your gimbaled camera to new heights. The pedestal column has 700mm (27.5 inches) of travel from a starting height of approximately 750mm (29.5 inches) subject to Drive-End. It has been designed for camera/gimbal packages of up to 22Kg (48.5lbs).
V-Con PRO
The V-Con PRO is a low-level vertical stabilizer. It removes vibrations and smooths out bumps in the terrain without introducing any unwanted swaying, keeping your footage as stable as possible.
MASTER Controller
The all-new, intuitive, ergonomically-designed handheld controller for your AGITO.
RF Modules
The AGITO's modular design allows you to swap out your RF module for different frequencies depending on your environment. Comes with 2.4GHz as standard.
Foot Pedals
The foot pedals attach to the master controller and are used to control the Tower.
Lithium-ion Batteries
The AGITO is powered by 48V 99Wh Li-ion batteries. They are completely internally managed and flight-safe.
Multi-Terrain Wheels
Good grip on a variety of terrain types. These wheels are the perfect all-around solution.
Monster Wheels
When you need to tackle tough terrain, these large off-road wheels feature a softer tread to absorb a large majority of bumps. They also add an extra 5mph to the top speed due to their greater diameter.
Dolly Wheels
This wheel set is designed to provide the ultimate smooth ride on studio floors and flat, uniform surfaces.
Features:
- Fully modular design
- Packs into (5) custom flight cases, each weighing under 70.5 lb (32 kg), for air/ground transportation or storage
- Maximum Chassis Payload:
- 70.5 lb (32 kg) on V-Con Pro
- 50 lb (23kg) on AGITO Tower
- 0.03 mph (1.5 cm/s) minimum speed
- Max. Speed Without Training / With Basic Training:
- Sports: 12.1 mph (19.5 kph)
- Sports + Monster Wheels: 14.8 mph (23.8 kph)
- Sports + Tower: 6.9 mph (11.2 kph)
- Sports + Tower + Monster Wheels: 8.4 mph (13.6 kph)
- Max. Speed with Advanced Training:
- Sports: 21.7 mph (34.9 kph)
- Sports + Monster Wheels: 26.4 mph (42.4 kph)
- Sports + Volt*: 26 mph (41.8 kph)
- Sports + Volt* + Monster Wheels: 31.6 mph (50.9 kph)
- Up to 984' (300m) wireless operating range (dependant on environment)
- RF: modular, 2.4GHz hopping spread spectrum standard (other frequencies available)
- Encoded motor system for highly accurate movement at low speed
- Adjustable throttle and steering behaviors
- Recordable moves (30 minute move memory)
- 4WD with independent adjustable suspension for multi-terrain use
- (3) steering modes: 2-wheel, 4-wheel, and Crab
- 8.2' (2.5m) turning circle (4WS mode, multi-terrain/dolly wheels)
- Runs on (2) 48V (100Wh flight safe) Lithium-ion batteries
- (2) Battery Chargers included
- 1 hour charge time (from flat), depending on environmental conditions
- Battery Life Cycle: 300-500 charge cycles
- Auxiliary Power Output: (2) 12V DC (total shared 2A load)
- Data Connection: CAN Bus, RS232, UART
- Adjusts to any existing track gauge from 12" to 16" (30cm to 40.9cm) with optional TRAX drive-ends upgrade (sold separately)
- Camera/Remote Head Mounting:
- Using V-Con Pro & Mitchell Plate: Mitchel Mount (Cheeseplate Adapter for Freefly & Ronin 2 mounting included)
- Using AGITO Tower: Motion Impossible Quick Release Plate (supports SHOTOVER G1, ARRI SRH-3/360, Freefly, Ronin 2)
- Mounting Height:
- Mitchell Plate:
- Multi-Terrain/Dolly Wheels: 9.6" (24.5cm)
- Monster Wheels: 10" (25.5cm)
- V-Con Pro:
- Multi-Terrain/Dolly Wheels: 11.6-16.3" (29.5-41.5cm)
- Monster Wheels: 12-16.7" (30.5-42.5cm)
- AGITO Tower:
- Multi-Terrain/Dolly Wheels:
- Top Position: 58.3" (148cm)
- Bottom Position: 30.3" (77cm)
- Monster Wheels:
- Top Position: 58.7" (149cm)
- Bottom Position: 30.7" (78cm)
- Multi-Terrain/Dolly Wheels:
- Mitchell Plate:
- Chassis Weight: 82.9-107.5 lb (37.6-48.8 kg)
- Dependent upon configuration
*AGITO Volt availability TBD.
NOTE: Gimbal/remote head, camera system and other unlisted accessories (e.g., ice/snow treads) sold separately.
What's in the Box
- 4 x Rolling Hard Cases
- 4 x Multi-terrain Wheels
- 4 x Dolly Wheels
- 8 x Soft ISO-Dampeners
- 8 x Hard ISO-Dampeners
- V-Con Adapter Plate (Pre-fitted)
- 4 x Monster Wheels
- V-Con Pro
- 4 x Medium Shocks
- 4 x Soft Shocks (Pre-fitted)
- Wheel Nut Tool
- 4 x Lock-Out Bars
- 2 x AGITO Sports Ends
- Quick Release Plate
- 3 x Gas Struts (Light/Medium/Heavy)
- Tower Comms Cable
- Pedal Splitter Cable
- 2 x Foot Pedals
- Straight Mounting Bracket Pair
- AGITO Tower (Standard)
- Firmware Update Cable
- Tool Set
- RF Module Set (2.4Ghz)
- 2 x 48V Battery Chargers
- 4 x AGITO Batteries
- Master Controller
- AGITO Core
Specifications
Key Highlights
- Modular Free-Roaming Dolly System
- 70.5 lb (32 kg) payload (V-Con Pro)
- 32 mph (51.49 kph) top speed*
- 15 mph (24 kph) "locked" speed
- Stabilized Camera Support
- Compatible with your remote head
- Tackles various types of terrain