Overview
The Dutti Dolly is a rectangular CNC'd aluminum plate with a built in Mitchell mount, measuring just 20" x 24", which rolls extremely low to the ground at just under 2" in height. The dolly rides on 8 inline skate wheels, mounted in pairs, to the 1/2" thick aluminum plate.
The width, weight, and wheel design of this dolly provide the operator the capability to make hard whip pans and quick tilts. The inline skate wheels will roll on the ground or any smooth surface. You can also use this dolly with track, on or off stands, and either over or underslung.
If you prefer operating with track to lock in your shot, Matthews offers right angle Dutti track in 4', 8' and 12' lengths. Their track stacks and nests for storage. Also Matthews' right angle track can be rested on apple boxes to achieve your desired camera height. You can even mount multiple dollies tandem or side-by-side.
Features:
- Capture extreme low angles with adaptability
- Shoot with ease in airplane or bus aisles, plus other tight spaces
- Convert from slider shot to dolly in seconds
- Ideal for stunts or process shots on a budget
- Mounts tripods, bazookas, tilt plates, or adapters
- Rig lights, props, etc. with ease due to tapped holes on the dolly board
Per the manufacturer, Dolly Grip James Saldutti, also referred to as "Dutti" in the Hollywood community, began developing this dolly nearly fifteen years ago. Since then, this dolly became a necessary tool used on hundreds of feature films, television shows, and commercials to achieve hundreds of different shots, stunts, gags, and on occasion also provides some light skateboarding in between takes.
NOTE: Track is sold separately.
What's in the Box
- Dutti Dolly with 8x inline skate wheels
Specifications
Key Highlights
- Capture low angles
- Use on track or roll on skate wheels
- Mounts tripods, fluid heads, cages, etc.
- Rig lights or moving props
- Ideal for tight airplane & bus aisles
