Wooden Camera Easy Top for RED WEAPON/EPIC-W/SCARLET-W/RAVEN

This Wooden Camera Easy Top is designed for your RED WEAPON, RED EPIC-W, RED SCARLET-W, and RED RAVEN cameras. It provides connection points for large accessories and standard ARRI accessory mount points. It is also easy to mount. Simply align it with the pogo pin at the front of your camera and attach via (4) 1/4-20 captured screws.

Two LCD/EVF interfaces are included on the Easy Top. One is located under the front portion of the top plate and one is included via the tethered side attachment. Both convert the LCD/EVF pogo pins to the standard 16-pin LEMO connectors which are found on the right side of the top plate. These LEMOs are specially manufactured to allow users to select the orientation in increments of 45 degrees.

A third interface is located underneath the center of the top plate. It communicates with the start/stop trigger on top of the camera. A board inside the top plate converts the non-standard interface to an ARRI standard 3-pin Fischer connector. Any optional ARRI standard trigger can be used with your RED camera. No power trigger is required.

You can pair the Easy Top with the original WEAPON handle from your camera to include start/stop capabilities. It also interfaces with the optional RED Monitor or standard EVF.

NOTE: Per Wooden Camera, the connectors used in assembly of the Easy Top are not manufactured by LEMO, but are made to the same specifications and are LEMO compatible.