ARRI Pro Set for Canon C500 Mk II (w/ Side Brackets)

This set includes the following items:

The ARRI Left Side Bracket for C500 Mk II is designed specifically to accommodate the geometry and controls of the Canon EOS C500 Mark II camera (sold separately). It offers additional stability and accessory mounting points (3/8"-16, 1/4"-20), and is compatible with the ARRI RMB-3 rod mounting bracket and RA-6 rosette adapter (not included). The side bracket attaches to your (bottom) Plate for Canon C500 Mk II (K2.0033439) and Top Plate for Canon C500 Mk II (K2.0033441) via captive screws (both plates are sold separately).

The ARRI Right Side Bracket for C500 Mk II is designed specifically to accommodate the geometry and controls of the Canon EOS C500 Mark II camera (sold separately). It offers additional stability and accessory mounting points (3/8"-16, 1/4"-20), and is compatible with the ARRI RMB-3 rod mounting bracket and RA-6 rosette adapter (not included). The right side bracket also features an interface for the original C500 Mk II microphone holder.

The side bracket attaches to your (bottom) Plate for Canon C500 Mk II (K2.0033439) and Top Plate for Canon C500 Mk II (K2.0033441) via captive screws (both plates are sold separately).

The ARRI Plate for Canon C500 Mk II can be used either shoulder-mounted, compatible with a VCT-14 style plate like the QRP-1, or by using the Bridge Plate Adapter BPA-5 to mount the cine-style BP-8, BP-9 or BPS-2. Both versions can be adjusted easily by sliding and exchanging, without the need to detach any accessories from the camera. The plate includes a front interface for two 15mm rods (not included) and an optional 15mm lightweight support at the rear.

The ARRI Top Plate for Canon C500 Mk II offers a variety of 1/4"-20,  3/8"-16, and M4 threads for additional accessory support (e.g., the RMB-3, CCH-4 / Sliding Adapter option, or CCH-2). An integrated, optically-centered 15mm lightweight support interface allows the user to mount 15mm rods, or the Mini Viewfinder Bracket MVB-1 (K2.0006140; sold separately). The C500 Mk II monitor (via the K2.0015520 Monitor Bracket for Canon C200; sold separately) or Canon's C700 EVF (via the K2.0013195 EVF bracket for C700; sold separately) can be attached to the MVB-1.

The ARRI CCH-4 Camera Center Handle is a completely closed top handle, compatible with most ARRI PCA top plates. Features numerous threads (1/4"-20, 3/8"-16, M4) for additional accessories (e.g., RMB-3; sold separately). The CCH-4 can be mounted to the ARRI Top Plate for Sony VENICE (sold separately) in three different positions.

The ARRI BPA-5 Bridge Plate Adapter enables quick transition from shoulder to ARRI-style cine bridge plates, such as the BP-8 & BP-9. It is compatible with the upper part of the ARRI Plate for Sony VENICE (K2.0017137), sold separately.

The ARRI Sliding Adapter for CCH-4 enables the CCH-4 handle to slide back and forth to find the perfect balance point on the camera. It can be mounted in different positions on various ARRI top plates.

IMPORTANT NOTE: This adapter is NOT compatible with the top plate for RED, Canon C300 Mk II, Sony a7, or the MAP-1 & MAP-2 plates for the ALEXA Mini.

The ARRI Rod Mounting Bracket (RMB-3) offers support for a single 19mm rod. It also provides mounting solutions for accessories, such as optional lens motors or your lightweight viewfinder mounts. Includes a locking lever to hold your rod in place once it slides into the bracket.

If you need to convert this to a 15mm rod, you can do so using the included 15mm Reduction Insert (K2.66255.0).

NOTE: 19mm rod and camera accessories are not included.

The ARRI MVB-1 Viewfinder Mounting Bracket provides a mount to secure your ARRI MVF-1 Viewfinder to the ALEXA Mini camera system or the ALEXA Mini LF camera (both sold separately). It allows the operator to position the EVF in multiple orientations to avoid obstructions.

NOTE: Requires MAP-2 Adapter Plate (for your ALEXA Mini) or MAP-2A (for your ALEXA Mini or Mini LF) for 15mm rod support, and 15mm LWS (top) rods. This is only the MVB-1 Viewfinder Mounting Bracket. Additional accessories, viewfinder, and cameras sold separately.

The ARRI Monitor Bracket for the Canon C200 LCD replaces the original bracket from Canon, the LCD attachment which came with your Canon C200 Camera. The ARRI PCA monitor bracket is an improved bracket to fit with your ARRI Viewfinder Mounting Bracket MVB-1.

NOTE: If you are using this with an ARRI MVB-1 Viewfinder Mounting Bracket, you will also need to purchase a MAP-2 Adapter Plate for 15mm rod support, and 15mm LWS (top) rods.

Each pair of lightweight 15mm Stainless Steel Rods are built using the same high quality materials as traditional rods with a wall thickness optimized for weight. These rods offer the same strength, unrivaled glide, and clamping quality as traditional stainless steel rods, while being up to 50% lighter in weight.

Rods are 15mm in diameter and with a 13.4" length (approx. 340mm). Sold as a pair (set of 2).