Overview
Overview
This Teradek Bolt 732 Pro Wireless HD-SDI Multicast Video Transmitter Dual Receiver Set captures up to 1080p wireless video up to 300 feet away. Includes a loop through of 3G-SDI Output on the transmitter. The receivers include dual SD/HD/3G-SDI Outputs. The transmitter runs on approximately 4.5 W of power while the receivers use about 6 W. Both receive DC input power in the 6-28V range.
The transmitter is housed in a milled aluminum chassis with 6x 1/4"-20 mount holes. The receiver features lightweight ABS plastic shell.
The internal rechargable Li-ion battery offers up to an hour of run time. You can recharge the battery via miniUSB or the DC LEMO input port.
Features:
- SD/HD/3G-SDI Input
- 3G-SDI Output, with loop through
- Supports up to 1080p60 resolution
- Wireless range: up to 300 feet
- Charge over miniUSB or DC Input
- 128 bit AES encryption
- 2-Channel Audio
- Hotshoe mount
- Can coexist with WiFi and 5GHz cordless phones
- Receiver Size: 2.95 x 4.33" (75 x 110 mm)
- Transmitter Size: 2.28 x 4.33" (58 x 110 mm)
- Operating Temperature: 32° to 122°F (0° to 50°C)
What's in the Box
- Pelican 1400 Case with Teradek Plate & Sticker Membrane
- Foam Top & Bottom Insert for Bolt & Pelican
- 2 x 2-Pin LEMO to 18W AC Power Adapter
- 2 x 1/4"-20 Thumbscrew
- LEMO to P-Tap Cable (6-28V)
- SDI Cable for Transmitter - 10"
- 2 x Bolt Receiver
- Bolt Transmitter
Specifications
Specifications
Key Highlights
- 1x Transmitter + 2x Receivers
- SD/HD/3G-SDI Input
- 3G-SDI Output, with loop through
- 1080p wireless video
- Range: up to 300 ft
Batteries
Battery Chemistry:
Li-Ion / Lithium-ion
Battery Features:
Rechargeable - via miniUSB or DC input
Operating Time:
Approx. 1 hour
Wireless
Bit Rate Details:
128 Bit AES encryption
TX Output:
1 x BNC - 3G-SDI loop through
Wireless Range:
Up to 300 feet
TX Input:
1 x BNC - SD/HD/3G-SDI
RX Output:
2 x BNC - SD/HD/3G-SDI
Audio Channels:
2-Channel
