Decimator MD-QUAD V3 SDI/HDMI Multi-Viewer / Quad-Splitter

The Decimator MD-QUAD V3 1-to-4 Channel Multi-Viewer / Quad-Splitter is a low cost, miniature, 3G/HD/SD-SDI, 1 to 4 channel Multi-Viewer or 4 to 1 input multiplexer. The MD-QUAD V3 features (4) auto-detect SDI inputs, and (1) SDI and HDMI output. It also offers an OSD (on-screen display if an optional monitor is connected), audio tone generator, audio channel pass-through, and a test pattern generator.

All inputs are independent and feature low latency buffering, allowing the MD-QUAD to throughput all four inputs on a single monitor simultaenously, regardless of frame rate or signal format. Different aspect ratios are also supported. The MD-QUAD features a push-button selector and rotary encoder for menu navigation (easily choose your output format), without the need to set DIP switches or connect the unit to a PC. The power input port features a locking connector to prevent accidental power loss during operation.

Features:

• Supports 3G level A and B on the input and output
• Allows conversion between 3G level A and B
• Professional 3G/HD/SD Test Pattern Generator
• (26) Selectable Output Formats
• (54) Test Patterns including Luma and Chroma Zone-plates
• Audio Tone Generator
• Horizontal and/or Vertical image flipping per window
• Custom Layouts with various standard layouts
• (16) Character UMD overlay per window with individual enables, custom positioning and size
• (8) Channel Audio Metering overlay per window with individual enables, custom positioning and size
• Tallies can be applied to either Tally Boxes (Default) or Border
• Tally boxes allows for up to (4) Tallies per window (Green, Red, Blue and Yellow)
• Load and restore Custom Layouts
• Fast switching between inputs using Full-Screen scaling
• Selectable output format in both Full-Screen and Multi-Viewer mode
• Low latency buffering for each input allowing non-synchronous inputs
• Linked (3G/HD/SD)-SDI and HDMI outputs
• 4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
• Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
• Variable aspect ratios per window
• Pass-Through mode allows any of the (4) inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs
• An extensive selection of user controllable functions via a easy to use rotary encoder for menu selection; LEDs and a push button can then be used for status and control
• USB port for control and updates
• Locking DC Power Socket
• 5 GPI on standard RJ-45 connector connector for Tallies and Remote Switching
• RS422/485 is also include on the same RJ-45 connector for Dynamic UMD and Tallies via TSL protocol