Rycote 12cm Classic-Softie Camera Kit (Standard Hole) - 19/22

This Rycote 12cm Classic-Softie Camera Kit (Standard Hole) - 19/22 features the essential audio accessories you need for recording outdoor locations and for ENG applications, when using your digital cinema camera or camcorder and your shotgun microphone.

Kit includes:

• Classic-Softie Windshield (Standard Hole) 19/22
• Hairbrush for fur maintenance
• InVision Video (Hot Shoe) Duo-Lyre Shockmount
• 10cm Hot Shoe Extension
• 3/8" Boom Swivel with Lever Camera Mic Clamp/Hot Shoe Adaptor
• 1/4" Adaptor

Complete this kit with your compatible microphone and your camcorder or digital cinema camera for ENG or run-and-gun applications.

Rycote 12cm Classic-Softie Windshield (Standard Hole) 19/22mm

The specially designed fur and acoustic foam of the Rycote Classic-Softie line of microphone windshields achieves up to 25 dB of wind-noise reduction on your shotgun mic without adverse effect upon high frequencies. This slip-on this Rycote 12cm Classic-Softie Windshield (Standard Hole) 19/22mm, and the other members of the Classic-Softie family, feature foam which is impervious to UV and moisture damage to withstand the harshest environments.

Classic Softies are ideal for ENG and outdoor location recording. They are available in a large range of sizes, this one is 5cm (19/22mm), and will fit most of your popular shotgun microphones.

Classic-Softies feature a thin-walled cavity design for acoustic transparency across the spectrum.

Features:

• To fit mic diameter: 19-22mm
• Internal Length: 120mm
• External Length: 145 mm
• Rubber diameter: 70mm
• Overall diameter: 120mm
• Fur length: 25mm
• Net Weight: 0.05Kg
• Gross Weight: 0.176Kg

Compatibility:

Audio-Technica: AT 4073a (BP4073), AT 875 (AT875R), AT 877

DPA: 4017

Schoeps: CMIT 5U

Sennheiser: MKH 8060 + MZF + MZX + MZL

Sony: ECM 673, ECM 674, NEX-FS700RH, PXW-FS7, PXW-X180, PMW-F5, PMW-55

Rycote InVision Video Shock Mount

Rycote InVision Video 1/4" Adapter Shock-Mount is a shock-mount, suspension system for high-quality external camcorder microphones between 19 and 25 mm in diameter, and up to 300 mm in length, and enables camcorder users and videographers to get the best possible sound for their productions using external camera-mounted microphones.

A lightweight, durable clamp holds the microphone in place, and is itself suspended in two of Rycote's W-shaped Lyre mounts, which provide substantially better isolation from camera motor and drive noise and vibrations than traditional on-camera microphone mounts. The Lyres are attached to a mounting bar which may be slotted into the hot shoe mount on top of your camera or screwed into the quarter-inch thread available on some camcorders by means of separately available adapters.

Rycote 10cm Hot Shoe Extension

The Rycote 10cm Hot Shoe Extension allows you to fit multiple attachments, such as multiple optional microphones or shockmounts, to your single hot shoe on your camera or camcorder.

The Hot Shoe Extension rotates 360° around the shoe fixture so you can adjust your microphone out of the shot or away from additional audio or lighting accessories. It also helps to reposition multiple accessories to achieve optimum camera balance.

3/8" Boom Swivel Adaptor

This 3/8" Boom Swivel Adaptor has been designed to allow products with a female 1/4" thread, i.e., your portable audio recorder or camera, to be mounted on a 3/8" male thread, such as your mic stand or your boom pole, or be attached to a camera hot shoe.

The adpator is made of plastic and brass components. It features a 180° swivel for improved ease-of-use, as well as an integrated cable clamp designed to greatly reduce cable-borne noise.